diff --git a/docs/documentation.md b/docs/documentation.md
new file mode 100644
index 0000000..fa1f06d
--- /dev/null
+++ b/docs/documentation.md
@@ -0,0 +1,131 @@
+# Docs 
+This is the documentation for the PASM scripting language. <br>
+Please note it is still in a very early stages so a lot of features you'd except in a scripting language like this one may not be present at the moment.<br>
+For more informations please read the [readme](https://github.com/ALittlePatate/pasm).
+
+# Table of Contents
+1. [Creating a script](#creating-a-script)<br>
+    a. [Scripts structure](#scripts-structure)<br>
+    b. [Registers](#registers)<br>
+    c. [Syntax](#syntax)<br>
+    c bis. [Note about return](#note-about-return)<br>
+    d. [Calling APIs](calling-apis)<br>
+2. [Errors](#errors)<br>
+3. [Running a script](#running-a-script)<br>
+4. [Contributing](#contributing)<br>
+
+## Creating a script
+The PASM interpreter will try to run any file even without the `.pasm` extension but for good practice it is good to only code inside of `.pasm` files.
+
+### Scripts structure
+Function are defined with a "label" (ex `main:`) to which you can jump (`jmp`) at any point.<br>
+The execution always starts at the `main:` label.<br>
+Labels must have been seen at least once during execution to be defined. Example :<br>
+
+Bad :
+```asm
+settoa:
+add a1, 65
+ret
+
+main:
+mov a1, 0
+jmp settoa
+
+jmp printa1 ; printa1 is not defined
+
+printa1:
+push a1
+call put
+```
+
+Good :
+```asm
+settoa:
+add a1, 65
+ret
+
+main:
+mov a1, 0
+jmp settoa
+
+printa1:
+push a1
+call put
+
+jmp printa1 ; will print "A" indefinitely
+```
+
+Please note that the execution will ignore labels, thus in this example printa1 will be executed even before the jump (`jmp`) occurs.
+
+### Registers
+There are in total 9 multi purpose registers you can use : `a1` to `a9`.<br>
+The `eax` register can be used like any other register but it is meant for holding return values can be overwritten by API calls (see [#Calling APIs](#calling-apis)) and regular operands (see the table below).
+
+### Syntax
+The syntax is very close to x86 Intel Assembly. Here is a list of the operands and their effects :
+| Operand          | Effect                | Sets EAX ?    |
+| :---:            |   :----:              |   :---:       |
+| **add** a1, a2   | Adds a2 to a1         | no            |
+| **sub** a1, a2   | Substract a2 from a1  | no            |
+| **and** a1, a2   | Performs a bitwise AND between a1 and a2. Stores the result in eax. | yes |
+| **xor** a1, a2   | Performs a XOR opration between a1 and a2. Stores the result in eax.| yes |
+| **mov** a1, a2   | Moves the value stored in a2 in a1 | no |
+| **cmp** a1, a2   | Compares a1 and a2. Sets the internal flags [last_cmp_code](https://github.com/ALittlePatate/pasm/blob/main/src/instructions.h#L6) | no |
+| **je** foo       | Jumps to `foo` if `cmp` returned `CMP_EQUAL`      | no |
+| **jne** foo      | Jumps to `foo` if `cmp` didn't return `CMP_EQUAL` | no |
+| **jb** foo       | Jumps to `foo` if `cmp` returned `CMP_BELOW`      | no |
+| **jnb** foo      | Jumps to `foo` if `cmp` didn't return `CMP_BELOW` | no |
+| **ja** foo       | Jumps to `foo` if `cmp` returned `CMP_ABOVE`      | no |
+| **jna** foo      | Jumps to `foo` if `cmp` didn't return `CMP_ABOVE` | no |
+| **jmp** foo      | Jumps to `foo`                                    | no |
+| **ret**          | Returns from the callee to the caller             | no |
+| **pop** a1       | Pops the first element of the stack into a1       | no |
+| **push** 69      | Pushes the value 69 to the top of the stack       | no |
+| **call** put     | Calls the `put` API                               | yes/no |
+
+All the operands are case-sensitive, meaning that `ADD` will be an invalid operand.<br>
+Please note that additional operands will be added in the future.
+
+#### Note about return
+Note that return can be used in a conditional jump like so :
+```asm
+cmp a1, 5
+je return ; note it's return and not ret when used like this
+```
+Due to current limitations, you can't jump to more than one function and return to the right place. Example :
+```asm
+bar:
+add a1, 2
+ret
+
+foo:
+add a1, 3
+jmp bar
+ret
+
+main:
+jmp foo
+; more code
+```
+Here `foo` will never return to the main function and will instead return to `ret`. TOFIX !!
+
+### Calling APIs
+APIs can be added in the [api.c](https://github.com/ALittlePatate/pasm/blob/main/src/api.c) and [api.h](https://github.com/ALittlePatate/pasm/blob/main/src/api.h) files.
+For the moment only `put` and `GetAsyncKeyState` can be called.<br>
+APIs behave like normal functions and are called using the `call` operand.
+
+## Errors
+Here is a list of all the errors you can encounter and how to fix them :
+
+* `invalid operand on line X` : you did not use an operand that was present in [the table](#syntax).
+* `wrong number of arguments on line X` : you have more or less arguments needed for an operand, see [table](#syntax).
+* `arg1/arg2 is invalid on line X` : the operand used can't work with the type of argument provided (register/number/char)
+* `X is not a valid label/api` : you tried to jump (`jmp`) or `call` an undefined label or non-existing API. Check [Scripts structure](scripts-structure).
+
+## Running a script
+Usage : `pasm.exe script.pasm`.
+
+## Contributing
+Please message me over on discord at `patate#1252` if you want me to add anything to the docs.<br>
+Feel free to create a pull request as well.